summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorkrakenrf <78108016+krakenrf@users.noreply.github.com>2022-06-01 03:39:56 +0200
committerkrakenrf <78108016+krakenrf@users.noreply.github.com>2022-06-01 03:39:56 +0200
commite1c9f5cfad96a1683b4f497e446a821354ca3ded (patch)
tree7d032d2f4a9d6b548f44a63ffb8bc5cfda4dc299
parentUpdated 2. Direction Finding Quickstart Guide (markdown) (diff)
downloadkrakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar.gz
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar.bz2
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar.lz
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar.xz
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.tar.zst
krakensdr_docs.wiki-e1c9f5cfad96a1683b4f497e446a821354ca3ded.zip
-rw-r--r--5.-KrakenSDR-Web-Interface-Controls.md7
1 files changed, 5 insertions, 2 deletions
diff --git a/5.-KrakenSDR-Web-Interface-Controls.md b/5.-KrakenSDR-Web-Interface-Controls.md
index 83e4b70..498c92d 100644
--- a/5.-KrakenSDR-Web-Interface-Controls.md
+++ b/5.-KrakenSDR-Web-Interface-Controls.md
@@ -313,7 +313,8 @@ How many coherent calibration sync failures are required before recalibration is
This provides an option to calibrate the full system by compensating for phase differences in the antenna coax cables.
-`explicit-time-delay` - If you've measure time delay with a VNA you can input the differences here. Please note the differences must be measured relative to channel 0. TODO: Show how to calculate time delay from cable length + velocity factor.
+`explicit-time-delay` - If you've measure time delay with a VNA you can input the differences here. Please note the differences must be measured relative to channel 0.
+
`touchtone` - You can output .s1p files for the 5 coax cables in your system, and add them to the _calibration folder. Name them as cable_ch0.s1p, cable_ch1.s1p and so on. You need to ensure that the touchstone file covers the frequency range that you will be using.
**IQ Adjust Amplitude**
@@ -322,4 +323,6 @@ If you have some reason to manually adjust IQ amplitudes, this can be done here.
**IQ Adjust Time Delay**
-If you are using `explicit-time-delay` as the IQ adjustment source, enter the delta phase differences here. (Relative to the CH0 cable, so delta = CH_0 - CH_X) \ No newline at end of file
+If you are using `explicit-time-delay` as the IQ adjustment source, enter the delta time differences here. (Relative to the CH0 cable, so delta = CH_0 - CH_X)
+
+**TODO: Show how to calculate time delay from cable length + velocity factor.** \ No newline at end of file